Vivotek IP7133/IP7134 Uživatelský manuál stáhnout pdf (Strana 7)

VIVOTEK - A Leading Provider of Multimedia Communication Solutions

User's Manual - 7

Installation

Network deployment

Setup the Network Camera over the Internet

This section explains how to conﬁgure the Network Camera to Internet connection.

1. If you have external devices such as sensors and alarms, make connection from general I/O

terminal block.

2. Connect the camera to a switch via Ethernet cable. Use Catagory 5 Cross Cable when

Network Camera is directly connected to PC.

3. Connect the supplied power cable from the Network Camera to a power outlet.

There are several ways to setup the Network Camera over the Internet. The ﬁrst way is to setup

the Network Camera behind a router

. The second way is to utilize a static IP. The third way is to

use PPPoE

Internet connection via a router

Before setting up the Network Camera over the Internet, make sure you have a router and follow

the steps below.

1. Connect your Network Camera behind a router, the Internet environment is illustrated as

below. About how to get your IP address, please refer to Software installation on page 9 for

details.

IP address : 192.168.0.3

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

IP address : 192.168.0.2

Subnet mask : 255.255.255.0

Default router : 192.168.0.1

LAN (Local Area Network)

Router IP address : 192.168.0.1

WAN (Wide Area Network )

Router IP address : from ISP

Cable or DSL Modem

N (

Loca

Area N

N (W

ide

Area

Network

)

POWER

COLLISION

INK

RECEIV

PARTITION

Internet

POWER

COLLISION

LINK

RECEIV E

PARTITION

1: Power

2: Digital output

3: Digital input

4: Ground

1 2 3 4 5 6 7 8 9 10 11 12 ... 86 87

Komentáře k této Příručce

Žádné komentáře

Vivotek IP7133/IP7134 Uživatelský manuál Strana 7

Komentáře k této Příručce

Související produkty a manuály pro Video monitorovací systémy Vivotek IP7133/IP7134