Vivotek MD7560D Uživatelský manuál stáhnout pdf (Strana 11)

EN - 10

Attach the dome cover to camera.

Secure the dome screws with the

supplied screwdriver. Finally, make sure

all parts of the camera are securely

installed.

Completion

Fine-tune the Camera Focus

The focus of this network camera is set from 1.0m to inﬁ nity by factory default. If you want to focus

on objects closer than 1.0m or the lens has lost focus, please ﬁ ne tune it in the following way.

Tighten the lens lock screw.

1. Loosen the lens lock screw.

2. Manually rotate the lens to ﬁ ne-tune the focus

until the live image is clear.

3. Tighten the lens lock screw.

Please secure the screws tightly to

avoid moisture.

Tear down the aluminum foil vacuum bag and

take out the silica gel. Attach the supplied silica

gel to the inner side of the Network Camera.

(Please replace the silica gel with a new one if

you open the back cover after installation.)

1 2 ... 6 7 8 9 10 11 12

Žádné komentáře

Vivotek MD7560D Uživatelský manuál Strana 11